CAS ED Series User Manual

8
2. Weighing with Tare
■ Tare is the weight of container being used for a commodity. The TARE key subtracts the weight of
the container.
① Place the container on the
platter.
② Press the TARE key, NET
lamp is on..
③ Place an item in the
container.
④ To release the TARE function, remove an item and
container from the platter and press the TARE key.
3. Counting Mode
■ If you want to count parts, first you have to set sample size.
OR
① Press the MODE key until the display shows “PCSSET”. Make
sure that PCS lamp is on. If you have set sample size before,
the display shows “0”.
② Press the SAMPLE key, then
the display shows “10”.
③If you want to increase sample size, press the SAMPLE key.
The display shows 10, 20, 30, 40, 50, 100, 150 and 200 every
time pressing the SAMPLE key.

CAS ED Series Specifications

General

Display	LCD
Tare Range	Full Capacity
Power Supply	AC adapter or battery
Units	lb, kg, oz
Operating Temperature	0°C to 40°C
Interface	RS-232
Humidity	85% RH max (non-condensing)