CAS ER JR series - Page 10

11
d. Tare function
Tare means the weight of container. You may use tare function when you weigh
an item with container and measure only the weight of item.
■ One time tare
① Place a container on the platter.
EX) 200g of tare.
② Press TARE key to set zero point.
EX) 200g of tare.
■ Successive tare
③ Place another container on the
platter. EX) 100g of tare.
④ Press TARE key to set zero point.
⑤ After weighing item remove all of the
container from the platter.
⑥ Press TARE key again to set zero.