ERROR MESSAGES & SPECIFICATION
■ Table : Error Message
The "Err 0" occurs when scale is not stable.
The "Err 1" occurs when a current zero point has
shifted from the last span calibration.
Please call your CAS dealer.
The "Err 3" is an overload error.
Please remove the weight.
The "Err 4" is leakage of payment.
Scale needs more payment.
The "Err 5" means there is already tare.
The "Err 6" means total price summation is over.
Please change unit price or
remove some weight.
The "Err 8" means Euro rating price is over.
Please change unit price or
change euro rate.
The "Err 13" means the soft key code is broken.
Please try to find out which key
lost soft key code and then input
this code again.
The "Err 15" means 1/2 or 1/4 unit price is over.
To Next Page
Loading...
