CAS ER JR series - Chapter 3. Users Set-up Mode

`
14
Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions
Options
Remarks
a. Auto power-off
NO / 10 / 30 / 60
b. Backlight ON/OFF
OFF / ON / 3 / 5 / 10
c. Brightness function
1 ~ 7
Default 3
d. Low battery backlight auto off
OFF / ON
e. Printer selection
NON/DEP-50/DLP-50
 Press ZERO key to save current option and move to next function setting mode.
 Press TARE key to move to other next option.
a. Auto power-off
This section explains how to set backlight on & off function and automatic off function.
Options
Description
Remarks
NO
 No auto power-off.
10 (minutes)
 Auto power-off in 10 minutes when no use.
30 (minutes)
 Auto power-off in 30 minutes when no use.
60 (minutes)
 Auto power-off in 60 minutes when no use.
① To get into “User’s Set-up Mode” press
ON/OFF key pressing and holding ZERO key.
① Select an option you wish to have by using
TARE key. Ex) 30 (minutes).
.