CAS ER JR series - Page 15

`
16
d. Low battery backlight auto off function
This section explains how to set Backlight Auto Off. If the scale uses
backlight Auto Off function, it will turn off when low battery indicator occurs
① Press ZERO key to move next function setting,
low battery backlight auto off..
② Press TARE key to select backlight on/off.
e. Selecting the printer
This section explains how to select the printer option when you'd like to use
the
printer connected to ER
JR
.
Options
Description
Remarks
NON
No printer in use
DEP-50
DEP-50 printer interface
DLP-50
DLP-50 printer interface
① Press ZERO key to move next function setting,
selecting the printer.
② Select the printer you’re using with
ER
JR
by pressing TARE key. EX) DEP-50