CAS PD-I User Manual

7 | P a g e
Connecting the CAS PD-I to your computer
To connect the CAS PD-I to your computer, you need the following cable:
The CAS Part Number is: JPDB SHARP RS232 7880-PD0-4134 or IBM 7880-PD0-4128
Turn off your computer and follow these steps:
1. Find the serial port on your computer.
2. Plug the serial cable connected to the scale into
the port.

CAS PD-I Specifications

General

Brand	CAS
Model	PD-I
Category	Scales
Language	English