CAS PDI Series User Manual

2
ㅋ

CAS PDI Series Specifications

General

Brand	CAS
Model	PDI Series
Category	Scales
Language	English

Summary

Safety Guidelines and Classifications

Installation Safety Precautions

General Installation Safety Rules

Weight Setup and Calibration Modes

Weight Setup Menu Overview

Lists calibration steps: CAL 1 (Max Capacity) to CAL 9 (Factor Calibration).

CAL 1: Setting Maximum Value

Procedure to set the maximum weight capacity of the scale.

CAL 2: Minimum Division and Decimal Position

Configures the minimum division and decimal point for weight readings.

CAL 3-1: Setting Multi Calibration Steps

Defines the number of steps for multi-point calibration of the load cell.

CAL 3-2: Zero Calibration Procedure

Step-by-step guide for performing zero calibration on the scale.

CAL 3-3: Setting Calibration Weight

Procedure to input the known weight for span calibration.

CAL 3-4: Span Calibration Procedure

Procedure to set the span using a known weight after zero calibration.

CAL 8: Zero Adjustment for Errors

Performs zero adjustment when zeroing errors occur.

CAL 10: Dual Range Configuration

Test Mode Operations

Test Menu Overview

Lists available tests: Key, Display, Load cell, and Serial communication.

Load Cell and A/D Conversion Test

Tests load cell connection and A/D conversion performance.

Serial Communication Test

Tests RS-232 serial communication (COM1, COM2) with a computer.

Weighing Mode Functions

Zeroing Function

Adjusts the zero point when it changes, utilizing the range set in F13.

Tare Function for Container Weighing

How to use the tare function to weigh with a container, including saving and removing tare.

RS-232C Interface Details

RS-232C Port Connection

RS-232 Communication Protocols

Error Message Reference

Weight Setup Mode Errors

Lists error codes (Err 21-28), their causes, and solutions during weight setup.

Weighing Mode Errors

Lists error codes (Err 01, 02, 08, 09, 10, 13, 15, 82, Over) and their solutions.