36
7. Weighing Mode
7-1. Zeroing Function (used when the zero point changes)
■ Range of zero point: within a range set in F13
Zero chanced. Press Zero Key to set the zero lamp on and 0.
7-2. Tare Function (used for weighing with a container) - LED
■ Maximum tare set range: maximum weight
* Caution: the weight including the tare cannot exceed the maximum weight.
Put a container on the load tray.
(Container weight: 10kg)
Press the tare key.
(Tare is saved.)
Put an object on the load tray.
(Net weight: 20kg)
Press the 'total * net weight' key (the value of object's weight is displayed.)
Remove the container and object from the load tray to display the saved tare.
■ If the tare is removed;
Remove the container and object from the load tray, and press the tare key (picture on the right) if the saved
tare is only displayed (picture on the left).
To Next Page
Loading...
