Installation
Instructions
c
cascade
W
corporation
For Technical Support . . . To Order Parts . . .
Call: 1-800-227-2233 Fax: 1-888-329-8207 Call: 1-888-227-2233 Fax: 1-888-329-0234
Internet: www.cascorp.com Internet: www.cascorp.com
Write: Cascade Corporation, PO Box 20187, Portland, OR 97294 Write: Cascade Corporation, 2501 Sheridan Ave., Springfield, OH 45505
K-Series Fork Positioner
Solenoid Control Kits
This sheet provides installation instructions and replacement
parts list for Cascade Solenoid Control Kits. The kits provide
two function operation using a single function hydraulic supply
and solenoid actuation to select the sideshift or fork position
functions. A Cable Reel and internal hose reeving or 6-N-1
Cable-Hose Reel is required to supply hydraulics and electric
signal to the solenoid.
Sideshifter Fork Positioner
Solenoid
Valve
NOTE: Kits are UL Classified (File No. AU3546) for safety in
Electric Battery (UL 583) and IC Engine (UL 558) Indust. Truck
type E, ES, G, GS,G/LP/ GS/LPS, LP, LPS, D and DS.
NOTE: UL Classified Kits require installation by qualified
personnel only without major disturbance, cutting, splicing or
soldering of factory installed wiring.
NOTE: To be UL Classified, these
kits must be used with a Cascade
UL Classified Power Supply.
Cascade Corp.
File No. AU3546
To Next Page
Need help?
General
