Cascade 23C User Manual

Cascade is a Registered Trademark of Cascade Corporation
SER MANUAL
U
cascade

corporation
Manual Number 8305557-R2
IMPORTANT: The forks and indicator are
paired and calibrated as a set. Do not
separate. Consult Cascade Service
department with questions.
NOTE: Weigh forks are factory calibrated
and ready to use.
Legal for trade models are factory
calibrated and ready to use. Additional
certification is required by a local weights
and measures authority.
CAUTION: Treat this precise weighing
system with care. Environment and
application will affect the system and
its components. Conditions with mud,
grime, water, corrosive chemicals and
abrasive substances can damage or affect
performance of the weigh system.
C-Series
Weigh Forks

Cascade 23C Specifications

General

Brand	Cascade
Model	23C
Category	Forklifts
Language	English

Summary

WARNINGS & SAFETY MEASURES

General Safety Guidelines

Provides crucial safety instructions for operators and equipment use.

Operation Hazards

Highlights risks associated with unqualified operators, overloading, and unsafe practices.

INSTALLATION

Standard Fork Installation

Step-by-step guide for installing standard weigh forks onto a forklift.

Rotator Fork Installation

Instructions for installing weigh forks on rotators, including third hook considerations.

USING INDICATOR

Indicator Icons and Display

Indicator Messages and Status

USING THE WEIGH SYSTEM

Preparation for Weighing

Load Handling and Weighing Operations

Load Handling

Normal Weighing Mode

Step-by-step guide for performing a normal weighing operation.

Tare and Weight Measurement Methods

Net, Tare, and Gross Weight

Procedures for obtaining net, tare, and gross weight values.

Tare Weight Methods

ADVANCED WEIGHING OPERATIONS

Piece Count Operations

Piece Count with Known Weight

BATTERIES

Fork Battery Status and Indicators

Charging Fork Battery Packs

Charging Fork Battery Packs

Indicator Battery Management

PERIODIC MAINTENANCE

Daily Inspection Procedures

Checks to perform before each shift to ensure proper operation.

Scheduled Maintenance

Procedures for 1000-hour and 2000-hour interval maintenance.