118305557-R2
USING THE WEIGH SYSTEM
WARNING: Operators (Drivers) must read
and understand this manual before being
allowed to operate this equipment. If the
operator does not understand any part of the
User Manual a supervisor should be asked for an
explanation. If it is still not understood, this equipment
should not be used.
WARNING: The C-Series Weigh Forks are to be
operated by a qualified operator only. Overloading, load
positioning, load stability, load security and unqualified
operators can result in a hazardous situation.
WARNING: Residual risk exists to pedestrians,
bystanders and service technicians in the work area.
Operate lift trucks and accessory equipment in a safe
working area and in compliance with facility, local and
national standards and rules.
WARNING: Before operating, perform the Daily
Inspection as described in this manual
Prior To Weighing
Position to vertical
Level load to
Horizontal
Verify forks are free of
obstacles prior to zeroing
Legal for Trade Certified:
±5% (3°) Horizontal
Verify the indicator shows
zero. If necessary, press the
"Zero" button.
Working Temperature Range:
-4° F (-20° C) minimum
105° F (40° C) maximum
NOTE: The forks are factory calibrated and ready to use.
Legal for Trade models are factory calibrated and ready
to use. Additional certification is required by a local
weights and measures authority.
To Next Page
Loading...
Need help?
General
