Cascade 65K - INTRODUCTION; Key Safety Warnings; OPERATION; Emphasize Safety!

3
6 Install the kit hoses. Route the hoses to prevent wear and
pinch points.
7 Install supply hoses from the mast internal reeving fittings
to the sideshift cylinder supply fittings. Route the hoses to
prevent wear and pinch points.
FP0957.eps
FP0960.eps
5
6
7
Mast reeving
fittings
FP0956.eps
5 Remove any existing fittings from the sideshift cylinder
ports. Install the new supply manifold and fittings to the
sideshift cylinder ports. Do not remove the flow restrictor
washers from the cylinder ports.
Remove
existing
fittings