CHAPTER 2 - SAFETY, DECALS, AND HAND SIGNALS
2-9
S2PV00033ZE01 NA Issued 11-08 Bur
SEAT BELT PRECAUTIONS
BC02N375
Figure 5
1. Insert the metal end of the right-hand belt strap
into the latch mechanism on the left-hand side of
the seat.
2. To unlatch the seat belt, press the red button on
the left-hand side latch mechanism.
M422A
EMERGENCY EXIT HAMMER
DC04D572
Figure 6
An emergency exit hammer is provided on the right
side of cab. In case of emergency, take the
emergency hammer, break the cab glass, and
escape from the cab. In addition, the emergency
hammer is equipped with a cutter on the lever side to
cut seat belt, etc.
SPECIFIC PRECAUTIONS TO THIS MACHINE
• Keep the load or tool as low as possible while
moving the machine around the job site.
• Never smoke while refueling.
• Do not use tractive force of the machine for
loading the bucket attachment nor to push or pull
any objects.
• Do not use swinging force of the machine for
operations.
• Do not perform “hammering” operation with the
bucket.
• Do not use this machine for anything other than its
intended purpose.
• DO NOT OPERATE bucket and arm cylinders to
stroke end repeatedly.
• Do not over exert the machine’s capacities.
• Never pull standing objects toward the machine.
• Do not use the long reach attachment for general
construction work at any time.
1. RIGHT HAND BELT STRAP
2. LATCH MECHANISM
WARNING: Before starting the engine
ensure seat belts are securely fastened. The
seat belt can help insure your safety if it is
used and properly maintained. Never wear a
seat belt loosely or with slack in the belt
system. Never wear the belt in a twisted
condition or pinched between the seat
structural members.
1
2
To Next Page
Loading...
