Need help?Do you have a question about the CASE CONSTRUCTION CX130B and is the answer not in the manual?
Instructions for cleaning metal parts and bearings.
Guidance on checking parts for wear and damage, and inspecting bearings.
Procedures for inspecting gears, oil seals, O-rings, and shafts.
Guidelines on using genuine service parts and specified lubricants.
Explanation of safety symbols, warnings, and tag usage.
Safe operation of controls, clothing, and fan belt awareness.
Awareness of hydraulic oil pressure and hydraulic cylinder safety.
Safety guidelines for removing pins and using grinding equipment.
Instructions for even tightening and applying Loctite to cap screws.
Provides torque values for various cap screw sizes.
Instructions for identifying machine model and serial number.
Guidance on recording engine make, type, and serial number.
Lists hydraulic and mechanical components for serial number recording.
Details required hydraulic fluids based on climate conditions.
Specifies transmission component oil and types of grease.
Specifies grease recommendations for hydraulic breakers.
Recommends CASE/AKCELA No. 1 engine oil and alternatives.
Chart showing oil viscosity ranges for different temperature conditions.
Lists conditions for suitable diesel fuel and applicable standards.
Details sulfur content, HFRR, and water content requirements for diesel fuel.
Advises on storing fuel to prevent impurities and condensation.
Emphasizes using genuine fuel filters and their maintenance.
Recommends anti-freeze for cooling system protection against freezing and corrosion.
Guidelines for fluid disposal and cleaning plastic parts.
Provides basic model information, operating weight, and performance data.
Lists dimensions for the machine with and without attachments.
Details various width, length, and height measurements of the main body.
Lists engine name, type, displacement, and output.
Details cooling system components and lubricant/coolant capacities.
Lists mesh size for hydraulic oil and fuel filters.
Describes the adjustability and type of the operator's seat and cab.
Details switches, monitors, and control functions.
Lists specifications for working lights, cab lights, horn, and other devices.
Details specifications for main pump, pilot pump, and control valve.
Lists specific hydraulic circuits and functions of the control valve.
Lists bore, rod diameter, and length for boom, arm, and bucket cylinders.
Details operating pressure, flow, and port sizes for the rotating joint.
Provides maximum flow, rated pressure, and voltage for solenoid valves.
Details valve specifications and shows secondary pressure graphs.
Details valve specifications and shows secondary pressure graph.
Details swing circle, brake, motor, and reduction gear.
Covers travel motors, brakes, reduction gears, and roller details.
Lists dimensions for boom, arm, and bucket configurations.
Provides digging radius, depth, and height specifications.
Details digging force for different arm lengths and modes.
Lists approximate weights for major machine components.
Lists weights for various individual components.
Provides standard and usage limit dimensions for the sprocket.
Lists standard and usage limit dimensions for idler wheel components.
Provides standard and usage limit dimensions for upper roller components.
Lists standard and usage limit dimensions for lower roller components.
Provides standard and usage limit dimensions for track components.
Details wear limits for boom foot and frame components.
Specifies wear limits for boom cylinder foot and frame.
Details wear limits for boom cylinder head and boom.
Provides wear limits for dipper cylinder foot and boom.
Lists wear limits for boom and dipper components.
Details wear limits for dipper cylinder head and dipper.
Specifies wear limits for bucket cylinder foot and dipper.
Lists wear limits for connecting rod and dipper.
Provides wear limits for compensator and bucket components.
Details wear limits for connecting rod, compensator, and bucket cylinder head.
Lists wear limits for dipper and bucket components.
Provides torque settings for various machine components.
Shows overall dimensions for the CX130B with standard arm.
Displays overall dimensions for the CX130B with short arm.
Shows overall dimensions for CX130B (LC) with short arm.
Provides overall dimensions for CX130B with long arm.
Instructions for identifying machine model and serial number.
Guidance on recording engine make, type, and serial number.
Lists hydraulic and mechanical components for serial number recording.
Details required hydraulic fluids based on climate conditions.
Specifies transmission component oil and types of grease.
Specifies grease recommendations for hydraulic breakers.
General| Brand | CASE CONSTRUCTION |
|---|---|
| Model | CX130B |
| Category | Excavators |
| Language | English |
To Next Page