CASE CONSTRUCTION CX130B - Engine and System Capacities; Engine Details and Specifications; Cooling System and Capacities; Filter Specifications

Issued 06-15
1002-12
Engine
Name............................................................................................................................................................ISUZU, 4JJ1X
Type: ....................................................... 4-cycle, water-cooled, overhead camshaft, vertical in-line, direct injection type
............................................................................................................................... (electronic control), with turbocharger.
No. of cylinders - bore x stroke.........................................................................4 - Ø95.4 mm x 104.9 mm (3.76 x 4.13 in)
Displacement........................................................................................................................................2999 cc (183 cu-in)
Compression ratio ....................................................................................................................................................... 17.5
Rated output......................................................................................................................................70.9 kW / 2000 min
-1
Maximum torque.......................................................................................................... 359 N.m (264.78 lb-ft) / 1600 min
-1
Engine dimensions (LxWxH) ........................................................................... 928x760x888 mm (36.53 x29.92x34.96 in)
Oil pan ...............................................................................................................................All direction 0.61 rad, inclinable
Oil pan capacity.................................................. Maximum: 15 L (3.92 gal) Minimum: 11 L (2.91 gal) (excluding oil filter)
Direction of rotation ......................................................................................................................Right (as seen from fan)
Starter, reduction type ...................................................................................................................................... .24 V, 4 kW
Alternator, AC type ............................................................................................................................................. 24 V, 50 A
Battery ................................................................................................................................................. 2 x 12V, 92 Ah/5 Hr
Cooling system
Fan type............................................................................................ Ø 550 mm (21.65 in), suction type - 8 blades, intake
Radiator
Fin type .................................................................................................................................................................. wavy
Fin pitch ............................................................................................................................................. 3.5 mm (0.137 in)
Oil cooler
Fin type .................................................................................................................................................................. wavy
Fin pitch ............................................................................................................................................. 3.5 mm (0.137 in)
Inter-cooler
Fin type ....................................................................................................................................
...............................wavy
Fin pitch ............................................................................................................................................. 4.0 mm (0.157 in)
Fuel cooler
Fin type .................................................................................................................................................................. wavy
Fin pitch ............................................................................................................................................. 4.0 mm (0.157 in)
Capacity of coolant and lubricants
Coolant ..................................................................................................................................................... 14.6 L (3.86 gal)
Fuel ........................................................................................................................................................... 260 L (68.7 gal)
Lubricant for engine..................................................................................................................................... 17 L (4.49 gal)
Lubricant for travel reduction gear (per side).............................................................................................. 2.1 L (0.55 gal)
Lubricant for swing reduction gear (per side) ............................................................................................. 2.2 L (0.58 gal)
Hydraulic oil............................................................................................................................................. 157 L (41.47 gal)
Capacity of hydraulic oil tank..................................................................................................................... 82 L (21.66 gal)
Air conditioning
R134 gas load ..............................................................................................................................................1Kg (2.20 Ibs)
Hydraulic oil filter
Suction filter (inside tank) ....................................................................................................................................105 mesh
Return filter (inside tank) ............................................................................................................................................ 6 µm
Pilot line filter (inside housing).................................................................................................................................... 8 µm
Fuel filter
Main filter.....................................................................................................................................................................2 µm
Pre-filter....................................................................................................................................................................5.5 µm
Pre-filter ......................................................................................................................................................................2 µm