CASE CONSTRUCTION CX31B - 1.1.5 HYDRAULIC PARTS; 1.1.6 WELDING REPAIR; 1.1.7 ENVIRONMENTAL MEASURE

Ძ
1.1.5 HYDRAULIC PARTS
(1) O-ring
࡮
Ensure O-rings have elasticity and are not damaged before use.
࡮
Use the appropriate O-rings. O-rings are made of various kinds of materials having different
hardness to apply to a variety of parts, su ch as the part for moving or fixed portion, subjected to
high pressure, and exposed to corrosive f luid, even if the size is same.
࡮
Fit the O-rings without distortion a nd bend.
࡮
Always handle floating seals as a pair.
(2) Flexible hose (F hose)
࡮
Use the appropriate parts. Different parts are used depending on the working pressure even the
size of fitting and the total length of the hose is same.
࡮
Tighten the fitting at the specified torque.
Ensure no kink, tension, inte rferenc e nor oil leakage is recognized.
1.1.6 WELDING REPAIR
(1) Refer repair welding to qualified person nel according to the appropriate procedure.
(2) Disconnect the ground (earth) cable of the battery before starting the repair.
Failure to do so will ca use damage to the electrical equipment.
(3) Move away the articles in advance that may cause fire if exposed to sparks.
(4) Before starting the repair of the attachment, do not fail to cover the plated surface of the piston
rod with flameproof sheet to prevent it from being exposed to sparks.
1.1.7 ENVIRONMENTAL MEASURE
(1) Run the engine at the place that is sufficiently ventilated.
(2) Industrial waste disposal
Dispose of the following parts according to the re levant regulations :
Waste oil and waste container
Battery
(3) Precautions for handling hydraulic oil
Exposure of eyes to hydraulic oil will cause inflammation. Wear protective glasses before handling
to avoid an accident. If an eye is exposed to the oil, take the following emergen cy measures :
-When an eye exposed :
Immediately wash away with city water sufficiently t ill stimulative feeling vanishes.
-When swallowed :
Do not let vomit, and receive medical treatment immediately.
-When skin exposed:
Wash with water and soap sufficiently.
(4) Others
Use replacement parts and lubricants authorized as the manufacturer's genuine parts.
㨇
1. OUTLINE
㨉
1-7