INTRODUCTION
Basic instructions - Important notice regar ding equipment ser vicing
AXIAL-FLOW 5130, AXIAL-FLOW 6130, AXIAL-FLOW 7130
All repair and maintenance work listed in this manual must be carried out only by qualied dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and /or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and /or components not approved by the manufacturer.
The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for
continuous improv ement. Some information could not be updated due to modicat ions of a technical or commercial
type, or changes to the laws and regulations of different countries.
In case of questions, refer to your CASE IH AGRICULTURE Sales and Service Networks.
47506838 04/04/2013
3
To Next Page
Loading...
Need help?
General
