INTRODUCTION
Safety rules and signal word denitions
AXIAL-FLOW 5130, AXIAL-FLOW 6130, AXIAL-FLOW 7130
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual and on machine decals, you will nd the signal words Danger, Warning, and Caution followed
by special instructions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER
DANGER indicates a hazardous situation which, if not avoi ded, will result in death or ser ious injury. The color
associated with Danger is RED.
M1169A
WARNING
WARNING indicates a hazardous situation which, if not avoided, could resul t in death or ser ious injury. The
color associated with Warning is ORANGE.
M1170A
CAUTION
CAUTION, used with the safety alert sym bol, indicates a hazardous situation which, if not avoided, could
resul t in minor or moderate injury. The color associated with Caution is YELLOW.
M1171A
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTI CE : Notice indicates a sit uation which, if not avoided, could result in machine or property damage. The color
associated with Notice is BLUE.
Throughout this manual you will nd the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE : Note indicates additional information which claries steps, procedures, or other information in this manual.
Throughout this manual you will nd the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47506838 04/04/2013
4
To Next Page
Loading...
Need help?
General
