EasyManua.ls Logo

Case IH BC12000ER - Operation: Starting the Generator - Part 1; Starting Procedure: Fuel Valve and Choke

Case IH BC12000ER
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
operation
TURN ON THE FUEL VALVE LEVER
CLOSE THE CHOKE VALVE
START THE GENERATOR
Turn the fuel valve lever to ON and let the fuel flow into the carburetor.
When the unit is in cold state move the choke valve to the full closed 
position and half closed position in thermal state If the generator unit is 
not started for two times in succession move the choke valve to the open 
position and then to operate the switch or hand pull starter.
Press it to START if its electrical start state then generator can be started 
In order to extend the service life of the storage battery,do not press on 
the switch for more than 3 seconds and the interval between two press-
ings should be longer than 10 seconds.