This document is an Operating Manual for CASE CVX 120, CVX 130, CVX 150, and CVX 170 Tractors, specifically for models with product identification DBD0080555 and higher. The manual provides essential information for the safe and correct operation, maintenance, and servicing of these agricultural tractors.
Function Description:
The CASE CVX series tractors are designed for agricultural use, including pulling, pushing, carrying, and operating various implements and trailers. They are intended for use in agriculture and similar environments. The manual emphasizes that the tractor should not be used for any purpose other than those described within, and any modifications or additions must be approved by Case Steyr Landmaschininentechnik GmbH to maintain product liability.
Important Technical Specifications (as indicated by the type plate details and general information):
- Models Covered: CVX 120, CVX 130, CVX 150, CVX 170 Tractors.
- Product Identification: From DBD0080555.
- Type Approval: e1-74/150 - 0144, approved for road traffic in all EC countries with a designed speed of up to 40 km/h. National approvals exist for versions with a measured speed of up to 50 km/h.
- Software Version: 2.0.
- Manufacturer: CASE STEYR Landmaschinentechnik Ges.m.b.H., Steyrerstrasse 32, A-4300 St. Valentin, AUSTRIA.
- EC Electromagnetic Compatibility: Meets guideline (89/336/EEC) and is CE marked.
- Weight Specifications (from example type plate for a "9090" model):
- Permissible total weight: 9500 kg
- Permissible front axle load: 4400 kg
- Permissible rear axle load: 7500 kg
- Permissible unbraked trailer load: (value not specified, but present) kg
- Permissible trailer load for independent braking: (value not specified, but present) kg
- Permissible trailer load for overrun braking: (value not specified, but present) kg
- Permissible trailer load for hydraulic/pneumatic braking: (value not specified, but present) kg
- These weights are dependent on the mounted tires.
- Engine: Details on engine maintenance are provided, suggesting a robust engine system.
- Transmission: Operating instructions for the transmission are included.
- Axles: Front and rear axle loads are specified. 4-wheel drive and independent front axle suspension options are mentioned.
- PTO Shaft: Instructions for PTO shaft operation are provided.
- Hydraulics: Front hydraulic maintenance is covered.
- Electrical System: Includes battery, bulbs, lamps, fuses, and relays.
Usage Features:
The manual is structured to guide users through various aspects of tractor operation:
- Instruments/Operating Controls: Detailed layout and function of all controls.
- Driving: Covers procedures for starting the engine, using the battery master switch (if fitted), driving seat switch, understanding indicator lamps and the combination instrument, standard starting procedure, stopping the tractor and engine, standstill control, parking interlock, and operating in low temperatures (winter operation).
- Transmission Operation: Specific instructions for operating the tractor's transmission.
- Cab Ventilation/Heating: Information on environmental controls within the cab.
- Towbars: Details on height-adjustable and standard towbars, including maintenance.
- Auto Pick-up Hitch: Instructions for the hydraulically extendable auto pick-up hitch (if fitted).
- Trailer/Attachment Connections: Information on dimensions for trailer/attachment towbar eyes and connections for trailer brake lines (if fitted).
- Additional Electrical Socket: Usage details for an additional electrical socket.
- Hazard Warning Lamps: Instructions for using hazard warning lamps.
- Recovery: Procedures for tractor recovery.
- Transporting the Tractor: Guidelines for safe transportation.
- Operational Use:
- Operating the Steyr front PTO shaft (if fitted).
- Preparing the rear three-point linkage.
- Operating the electronic lifting gear control (EHR).
- Preparing the Steyr front-end lifting gear (if fitted).
- Working with the Steyr front-end lifting gear.
- Auxiliary control units and operating them.
- Differential lock operation.
- Operating the 4-wheel drive.
- Operating the front axle independent suspension (if fitted).
- Fastening bracket for external levers.
- Tyres/Wheels/Track Width/Ballast: Adjusting front and rear axle track widths, 4-wheel drive tire combinations, front wheel mudguard, 4-wheel drive tractor (if fitted), and tractor ballast.
Maintenance Features:
The manual provides comprehensive maintenance guidelines to ensure the longevity and safe operation of the tractor:
- General Maintenance: Covers lubrication, daily inspections, engine maintenance, engine/transmission unit maintenance, hydraulic maintenance, steering maintenance, front axle maintenance, brake maintenance, towbar maintenance, electrical maintenance, front PTO-shaft maintenance, front hydraulic maintenance, and general maintenance.
- Environment: Notes on environmental considerations.
- Plastic and Fibre-glass Reinforced Parts: Specific care instructions.
- Tool Box: Location and contents of the tool box.
- Operating Hours Counter: Information related to tracking operating hours.
- Engine Hood: Access and maintenance related to the engine hood.
- Lubrication and Filling Levels: Regular checks and replenishment of fluids.
- Electrical System: Detailed information on battery, replacing bulbs and lamps, and fuses and relays.
- Safety Labels: Importance of understanding and maintaining all safety labels on the machine.
- Dealer Support: Emphasizes contacting an authorized retailer for additional manuals, information, and support, as they employ specially trained engineers.
- Manual Care: Instructions to keep the operating manual complete, in good condition, and stored in the designated compartment on the tractor. The manual is an integral part of the tractor and must be handed over with it if sold or hired out.
The manual also includes critical safety warnings, categorized as DANGER (red), WARNING (orange), and CAUTION (yellow), to highlight potential hazards and ensure safe operating practices. It stresses that only trained drivers who have read and understood all manuals and safety labels should operate or maintain the machine.
Need help?
To Next Page
General