17
Constant engine speed
Two electronically regulated constant engine speeds can be stored.
This function is particularly helpful when operating with PTO. The
engine speed can conviniently be reduced on the headland by
simply pressing a button on the Multicontroller and increased again
in the same way.
1. CES on / off
2. Adjust CES 1: hand throttle at idle, short press up/down
adjusts in10 rpm steps, constant pressing adjusts in 100 rpm
steps.
3. Change to CES 2 and adjust like before.
4. Work with CES (CES on): hand throttle above 1000rpm
5. Change between speed 1 and 2.
1
2
5
3
5
To Next Page
Loading...
