SAFETY
RULES
TOOLS
- Keep head, body, limbs, feet, fingers or hands away from
bucket, blade or ripper when
in
raised position.
Prior to any intervention, install all safety devices accord-
ing to current rules and regulations.
-
In
case equipment
on
the machine must
be
operated by
hydraulic systems, remember to proceed only after seat-
ing
in
the operator's compartment. Make sure that there
are no persons
in
the operating area of the machine.
Alert people before operating using the horn and by
voice. Move the equipment very carefully.
- Do not use machine to transport loose objects, unless
proper devices for this purpose are provided.
- Clutches and brakes of this machine and eventual
auxiliary equipment and attachments (such as operat-
ing cylinder or winches control valves) must always
be
properly adjusted
in
accordance with the instructions
provided by the Manuals of the Manufacturer.
- Never perform adjustments with engine running, except
when called for by the above instructions.
When changing work shift, check that wheel or
rim
securing screws and brackets are not loosen; if neces-
sary, retighten to the prescribed torque.
_A
WARNING
On machines having hydraulically,
mechanically,
and/or
cable
controlled
equipment (such as shovels, loaders,
dozers, excavators etc.)
be
certain the equipment
is
lowered
to
the
ground
before servicing,
adjusting
and/or
repairing.
If
it
is
necessary to have the hydraulically, mechanically, and/or cable
controlled
equipment
partially
or
fully
raised
to
gain access to certain items,
be
sure
the
equipment
is suitably
supported
by
means
other
than
the hydraulic
lift cylinders, cable
and/or
mechanical devices used
for
controlling
the equipment.
VII
To Next Page
Loading...
