4 - 24
DIAGNOSTIC - SELECTION
CASE TRAINING CENTER
AUGUST 2000
Procedures
1. This is what to do to detect defects when the message is still displayed after all necessary measures have
been taken to correct the error.
2. This is what to do if the problem is not indicated by a message but machine operation is not correct.
A. Engine
3. Problem without message.
Message displayed Description of the problem Problem No.
Low fuel The message is still displayed even after refilling the fuel tank. 1
Low coolant The message is still displayed even after refilling with coolant
solution.
2
Low oil press The message is still displayed even after adjusting the engine
oil pressure.
3
Over heat The message is still displayed even when the hydraulic oil
temperature is 84°C or less and the engine coolant
temperature is 92°C or less.
4
Alternator The message is still displayed. 5
Elec. problem The message is still displayed. 6
Description of the problem Problem No.
6
7
Description of the problem Problem No.
8
The engine does
not start.
"ELEC. PROBLEM" is shown on the monitor.
YES
NO
Impossible to change travel speed
To Next Page
Loading...
