4 - 28
DIAGNOSTIC - SELECTION
CASE TRAINING CENTER
AUGUST 2000
Overheating
Description of problem No. 4
- The message is still displayed even when the real temperature is less than the following:
Hydraulic oil temperature 84°C, engine coolant temperature 92°C.
Prior check:
1. Make sure that 8 bars are displayed on the hydraulic oil and engine coolant temperature gauge bar-graphs.
CM00F004
1. Main electronic control box
2. Engine electronic control box
3. Engine coolant temperature sender
4. Hydraulic oil temperature sender
1
2
3
4
To Next Page
Loading...
