GENERAL INFORMATION
1 - 15
CASE TRAINING CENTER
AUGUST 2000
FLUIDS AND LUBRICANTS
Lubricants must have the correct properties for each application.
Hydraulic fluid
CASE hydraulic fluid is specially designed for high pressure applications and for the CASE hydraulic system. The type
of fluid to be used depends on the ambient temperature.
Temperate climates
-20°C to +40°C
Fluid type ISO VG 46
Hot climates
0°C to +60°C
Fluid type ISO VG 100
Cold climates
-40°C to +20°C
Fluid type ISO VG 22
These various grades of fluid must be in conformity with CASE.
Transmission component oil
Extreme pressure oil used for enclosed transmission components.
Extreme pressure oil type API GL5 grade 80W90 or ISO VG 150
Grease
The type of grease to use depends on ambient temperature.
Temperate and hot climates
-20°C to +60°C
Extreme pressure grease EP NLGI grade 2 with molybdenum disulphide.
Cold climates
-40°C to +20°C
Extreme pressure grease EP NLGI grade 0.
WARNING: The conditions of use for individual fluids and lubricants must
be respected.
!
To Next Page
Loading...
