GENERAL INFORMATION
1 - 19
CASE TRAINING CENTER
AUGUST 2000
(A) Have this checked by your CASE Dealer every 600 hours or once a year.
(B) Or when the central zone of the restriction indicator is red.
(C) Or after cleaning 6 times.
(D) Check after the first 50 hours during the run-in period.
(E) Have this checked by a specialist every 6 months.
(F) Replace after the first 50 hours during the run-in period.
(G) Or after cleaning the primary air filter element 3 times.
(H) Drain after the first 250 hours during the run-in period.
(I) Have this checked by your CASE Dealer every 6 months.
(J) Every two years or twice a year (autumn/spring) if antifreeze is used.
(K) Periodically.
(L) Check once a month and have it checked every 6 months by a specialist.
NOTE: Once the machine has completed 500 hours (then 1000 hours, 1500 hours, etc...) the message “Service due”
will appear on the screen by way of a reminder that service work is due. See “Systems display and control panel”
(item 10), in the “Controls/Instruments/Accessories” Section.
To Next Page
Loading...
