SECTION 1 - SAFETY PRECAUTIONS
1-8
YN20T01089P1
PV1-12
PV1-13
PV1-14
PV1-15
PAY ATTENTION TO WORKING MACHINE
USE PROPER ATTACHMENT
PREVENT FIRES-CLEAN UP SPILLS
CONFIRM OPERATING PATTERNS
M. PAY ATTENTION TO WORKING MACHINE
Do not approach a working machine. Make
sure to make visual contact with the operator
before approaching a working machine.
N. USE THE PROPER OPTIONAL ATTACHMENT
Use only optional attachments designed for and
approved by CASE. Read, understand and
follow all instructions in the manual
accompanying the optional attachment. Use of
any optional attachment not approved by CASE
in writing, can cause serious injury to
personnel, damage to the machine and its
components and shorten the life of the
machine. Contact an authorized dealer for
optional attachments available for the machine.
O. PREVENT FIRES
Leaking or spilled fuel, lubricants and hydraulic
oil are fire hazards. Clean and properly dispose
of spills as they occur. Repair or replace all
leaking components to prevent fire. Also, clean
the machine regularly removing all debris to
help prevent fires, pay particular attention to
removal of leaves, sticks, paper etc. Keep fire
extinguisher in an accessible area and know
how to use the fire extinguisher should a fire
occur.
P. CONFIRM OPERATING LEVER PATTERNS
Slowly operate the control levers to confirm the
operating patterns in advance.
The figure shows the standard operating
system, specified in ISO.
Refer to page 2-9 for more details regarding
the different operating control functions.
To Next Page
Loading...
