Case JX70 - Engine Removal - Initial Disconnections; Disconnecting Battery, Fluids, and Pipes

SECTION 10 -- ENGINE -- CHAPTER 1 7
84176554 -- 03--2008
Op. 10 001 10
ENGINE R.I.
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks. Check that no
one is in the vicinity of the load to be lifted.
CAUTION
Always use appropriate tools to align fixing holes.
NEVER USE FINGERS OR HANDS.
1. Disconnect the battery negative lead (1).
2. Drain the oil from the transmission--gearbox
housing.
3. Drain the cooling system.
1
4. Remove the exhaust pipe, attach lifting chains
(2) to the bonnet (1) and attach the chain to the
hoist.
2
2
5. Disconnect the electrical connection (1) of
bonnet.
3