INTRODUCTORY NOTES
-- This manual is divided into sections identified by two--figure numbers and each section has independent
page numbering.
-- The different sections can easily be found by consulting the table of contents on the following pages.
-- The document number of the manual and the edition/update dates are given at the bottom of each page.
-- Pages updated in the future will be identified by the same document number followed by an additional digit:
first standard manual edition 84176554A -- 1
st
update 84176554A1 -- 2
nd
update 84176554A2 -- etc.
Updated pages can replace or supplement the pages of the standard manual; the necessary information for
the procedure by which to add or replace the pages is given on the frontispiece of the update.
An appropriately updated index will complete the publication.
If it is necessary to issue a new updated manual (2
nd
edition) this will have the document number 84176554B,
which indicates that the manual is composed of the standard version 84176554A complete with all the up-
dates: 1
st
update 84176554A1 -- 2
nd
update 84176554A2 -- etc.
-- The information contained in this manual was current on the date printed on each section. As CASE IH
constantly improves its product range, some information may be out of date subsequent to modifications
implemented for technical or commercial reasons, or to meet legal requirements in different countries.
In the event of conflicting information, consult the CASE IH Sales and Service Departments.
IMPORTANT WARNINGS
-- All maintenance and repair work described in this manual must be performed exclusively by CASE IH service
technicians, in strict accordance with the instructions given and using any specific tools necessary.
-- Anyone performing the operations described herein without strictly following the instructions is personally
responsible for any eventual injury or damage to property.
-- The Manufacturer and all organisations belonging to the Manufacturer’s distribution network, including but
not restricted to national, regional or local distributors, will accept no responsibility for personal injury or
damage to property caused by abnormal function of parts and/or components not approved by the
Manufacturer, including those used for maintenance and/or repair of the product manufactured or marketed
by the Manufacturer.
In any case, the product manufactured or marketed by the Manufacturer is covered by no guarantee of any
kind against personal injury or damage to property caused by abnormal function of parts and/or components
not approved by the Manufacturer.
No part of the text or illustrations
may be reproduced
PRINTED IN FRANCE
CNH GLOBAL N.V.
Print No. 84176554 -- 03 -- 2008
Find manuals at https://best-manuals.com
To Next Page
Loading...
