Case JX70 - Page 6

84176554 -- 03--2008
Drive Lines Chapter 1
Section Description Page
23 000 Main specification 1..............................................................
Torque settings and Tools 2.......................................................
Cross--Sectional views 3..........................................................
23 101 26 Transmission shafts and guard (Disassembly -- Assembly) 4...........................
23 101 40 Drive gear housing (Removal -- Installation) 5........................................
23 101 42 Drive gear housing removed (Disassembly -- Assembly) 7.............................
FRONT AXLE MECHANICAL TRANSMISSION SECTION 25
Front Axle Mechanical Transmission Chapter 1
Section Description Page
25 000 Main data 1.....................................................................
Tightening torques 4.............................................................
Tools 6.........................................................................
Cross--sectional views 7..........................................................
Description and operation 9.......................................................
25 100 30 Complete front axle. Removal -- Installation 10......................................
25 100 38 Front axle. Removal -- Installation 14..............................................
25 108 46--47 Steering knuckle bearing pins. Replacement 24.....................................
Stub axle adjustment 25.........................................................
Wheel hub bearing adjustment 27.................................................
Bevel drive adjustment 29........................................................
25 102 24 Front axle differential. Overhaul 36................................................
25 100 27 Front axle differential with LIM--SLIP. Overhaul 37...................................
Front axle differential with NO SPIN. Overhaul 39....................................
44 511 80 Leading drive wheels toe--in check 42..............................................
REAR AXLE AND TRANSMISSION SECTION 27
Rear Axle And Transmission Chapter 1
Section Description Page
27 000 Main data 1.....................................................................
Tightening torques 3.............................................................
Special tools 5...................................................................
Cross--sectional views 7..........................................................
Description and operation and troubleshooting 9.....................................
21.118.10 -- 12 Transmission--gearbox casing Removal--Installation 10...............................
21.118.85 Transmission--gearbox casing Disassembly--Overhaul 34.............................
Gearbox driven shaft end float adjustment 42.......................................
Differential lock engagement sleeve adjustment 43..................................
Determining the bevel pinion positioning adjustment ring 44...........................
Adjusting the taper roller bearings for the bevel pinion shaft 46........................
Adjusting the bearings and checking the backlash 47................................
Find manuals at https://best-manuals.com