SECTION 2 - OPERATION
2-16
REMOVE AND INSTALL BUCKET OR
ATTACHMENT
Remove Attachment
Raise the loader off the ground and position the
attachment level to the ground.
Shut the engine off and lock the joystick control lever
in neutral position.
Apply the parking brake.
0153
32
Pull the bucket lever to the disengaged position (left).
NOTE: It is easiest to move the lock lever to the open
position if the loader has been lifted about 1 meter (39
inches).
0167
33
Lock the lever behind the catch.
0168
34
To Next Page
Loading...
