OPERATING THE MACHINE
3-3
AFTER DAILY OPERATION - PARKING
Secure the machine:
- Carry out daily service operations.
- Park the machine.
- Park machine on dry and level ground. Place the
working equipment on a stand or on the ground.
- Return the machine to basic position.
- To stop the machine on a grade:
park the machine with face downhill and with the
teeth of the bucket pushed firmly into the ground.
- Secure the machine with the wheel chocks.
- Lock the upper structure.
- Activate the parking brake.
- Shut off the engine (turn the ignition key to posi-
tion “0”).
- Remove the ignition key.
- With special attachment, move both hydraulic
control levers and the pedal in all directions, to
allow all cylinders and the system to release pres-
sure.
- Disconnect the pilot control.
- Close cab glasses and windows.
- Lock the cab door and all machine covers and
hoods.
- Remove gross dirt from machine.
- Visual check of hydraulic system, axle and reduc-
tion gears tightness.
- Visual check of machine and attachment status:
verify the presence of possible damages to the
upper structure and undercarriage.
- Visual check of tyres tightness and status.
- Protect the machine against unauthorized starting.
To Next Page
Loading...
