Casio 5719 User Manual

●
Remaining Charge and Dead Battery
You can determine if the charge level is low by
checking the hand movement. Functions
become disabled as battery power goes low.
Important!
●
Should the battery go low or go dead,
expose the face (solar panel) to light as
soon as possible.
Note
●
Exposing the watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.
Low Battery Power
The second hand jumps at two-second
intervals.
30
Second hand
Dead Battery
All hands and the day indicator are stopped.
1
●
Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Charging Times Required for 1 Day of
Operation
Light Level (Lux)
Approximate
Charging Time
50,000 8 minutes
10,000 30 minutes
5,000 48 minutes
500 8 hours
Charge Recovery Times
●
Sunny day, outdoors (50,000 lux)
Dead battery
n
Medium
charge
2 hours
Medium charge
n
High
charge
17 hours
High charge
n
Full charge
5 hours
●
Sunny day, near a window (10,000 lux)
Dead battery
n
Medium
charge
5 hours
Medium charge
n
High
charge
63 hours
High charge
n
Full charge
17 hours
●
Overcast day, near a window (5,000 lux)
Dead battery
n
Medium
charge
8 hours
Medium charge
n
High
charge
102 hours
High charge
n
Full charge
28 hours
●
Indoor fluorescent lighting (500 lux)
Dead battery
n
Medium
charge
90 hours
Medium charge
n
High
charge
-
High charge
n
Full charge
-
Note
●
The charge level is indicated by the
Battery level indicator.
l
Checking the Charge Level
●
Actual charging time depends on the
charging environment, watch settings,
and other factors.
●
Power Saving
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, all hands will stop at 12 o’clock and the
watch will enter Level 2 power saving.
Level 1 :
Second hand stops to save power.
Level 2 :
The following operations are stopped to save
power: all hand movement (excluding the day
indicator), Bluetooth connection, and alarm
alerts.
Note
●
Note that the watch also may enter the
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.
Recovering from Power Saving Operation
Use one of the operations below to exit power
saving.
●
Press any button.
●
Pull out the crown.
●
Move the watch to a bright location.
Watch Operation Guide 5719
10

Casio 5719 Specifications

General

Brand	Casio
Model	5719
Category	Watch
Language	English