Casio 5719 - Phone Connection: Advanced Functionality; Swapping Times, Setting Alarms, and Timers via App; Correcting Hand and Day Indicator Alignment via App

●
Swapping Your World Time and Home
Time
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
●
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
30 30
After swappingBefore swapping
World Time
World TimeHome Time
Home Time
Note
●
Auto time correction does not work for
24 hours after swapping the Home
Time and World Time.
Setting the Alarm
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
●
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Configuring Timer Settings
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
●
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Correcting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time correction is
being performed, you can use the CASIO
WATCHES phone app to adjust them.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
●
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Watch Operation Guide 5719
14