Casio 5719 User Manual

Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Pull out the crown to the first click.
This turns on the alarm.
3. Rotate the crown to change the alarm time
setting.
30
Crown
Alarm minute
Alarm hour
Alarm on
24-hour
4. Push the crown back in.
Note
●
A beeper sounds for 10 seconds when
an alarm time is reached.
●
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
●
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Turning Off the Alarm
To stop the alarm from sounding, perform the
steps below to turn it off.
●
To have the alarm sound again, turn it on.
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to move the second hand to
OFF.
●
Each press of (D) toggles between on
and off.
30 30
Alarm offAlarm on
Moving to Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1. Configure the World Time (Dual Time) to
the current time at your destination.
Destination time
Current time
30
l
Using the CASIO WATCHES Phone
App to Configure Settings
l
Using Watch Operations to Configure
Settings
2. Disable auto time correction.
30
l
Using the Watch in a Medical Facility or
Aircraft
●
After Arriving
1. Swap the origin time zone time with the
destination time zone time.
30 30
After swapping
Before swapping
Destination time
Destination time
l
Using the CASIO WATCHES Phone
App to Configure Settings
l
Using Watch Operations to Configure
Settings
2. Enable auto time correction.
l
Using the Watch in a Medical Facility or
Aircraft
3. Correct the time setting.
l
Triggering Immediate Time Correction
Watch Operation Guide 5719
20

Casio 5719 Specifications

General

Brand	Casio
Model	5719
Category	Watch
Language	English