Casio 5719 - Stopwatch and Timer Operations; Measuring Elapsed and Split Times with Stopwatch; Configuring Timer Settings via Phone App

Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Measuring Elapsed Time
30
Minutes
Hours
Seconds
Hours (24-hour time)
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
3. Press (D) to reset the stopwatch to all
zeros.
Measuring a Split Time
30
Minutes
Hours
Seconds
Hours (24-hour time)
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Each press of (D) causes the elapsed
time up to that point (split time) to be
indicated for 5 seconds.
B
D
B
Stop
Split
Start
3. Press (D) to reset the elapsed time to all
zeroes.
Note
●
Up to 100 split times can be measured
during a single elapsed time operation.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted when battery power is
low.
Using the CASIO WATCHES
Phone App to Configure
Timer Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
l
Configuring Timer Settings
Watch Operation Guide 5719
21