E-29
Song Bank
Keyboard keys light to show the keys that should be pressed
to play along with Song Bank tunes as they play back. At the
same time, the display shows fingerings, chord names, notes,
tempo and other information.
1 Chord name
2 Tempo value
3 Measure number
4 Beat number
5 Fingering
6 Dynamic mark
7 Note pitch
Each tune has a preset default tempo (beats per minute) that
is set automatically whenever you select a tune. While the
tune is playing, you can change the tempo setting to a value
in the range of 40 to 255.
1. Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
1 Flash
2 Tempo value
While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input as
090.
Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected tune to its
default tempo.
Tunes 70 to 99 have tempo changes part way through in
order to produce specific musical effects. Note that the
tempo setting automatically returns to the default whenever
a tempo change occurs within one of these tunes.
1. Press the PLAY/PAUSE button while a tune is
playing to pause it.
2. Pressing the PLAY/PAUSE button again
resumes play from the point where it was
paused.
After you press the STOP button to stop playback, pressing
the PLAY/PAUSE button restarts play from the beginning
of the tune.
Key Lighting System Operation and Display
Contents During Song Bank Play
Adjusting the Tempo
To set the tempo
Pausing Playback
To pause playback
641A-E-031A
To Next Page
Loading...
Need help?
General
