Casio Casiotone CT-S500 - Saving and Recalling a Setup (MY SETUP); Saving to MY SETUP

Applying the Effect You Want to a Tone (Active DSP)
EN-105
1. Press ACTIVE DSP.
This enables Active DSP and displays the Active DSP screen.
• This causes the ACTIVE DSP LED to light.
2. Press HOLD.
This displays “HOLD”, which indicates you can configure the settings of other functions while
keeping Active DSP on.
3. Press HOLD again to return to the DSP screen and turn off Active DSP.
This causes “HOLD” to disappear from the display, indicating that configuring another function’s
setting will turn off Active DSP.
To use other functions with Active DSP turned on