Playing with a Rhythm Backing
EN-118
1.
While a rhythm is playing, press TONE.
This displays the currently selected tone number and name.
2.
Rotate the dial to select a tone.
• For tone information, see the “Tone List” (page EN-252).
• After you rotate the dial once to select an option, you can change the selection further using –
and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
Changing the Keyboard Tone While a Rhythm is Playing
To Next Page
Loading...
