— 36 —
5. Tap Backup now.
• This causes the dialog shown below to appear.
• If you do not wish to assign a password, go to step 6 without inputting anything.
6. Tap Yes to start the backup or No to close the dialog without backing up anything.
• The "Backup in Progress" dialog appears while the backup operation is being performed.
• The message "Backup complete!" appears on the display after the backup operation is complete.
7. After backup is complete, tap OK to quit Card Backup Tool.
Note
If the backup operation is interrupted or unsuccessful for any reason and there is a previous backup file
on the memory card you are using, the previous file remains intact on the card.
To interrupt a backup operation
1. Tap the Cancel button on the message box that is on the screen while a backup operation is in
progress.
• This causes the message "Do you really want to cancel?" to appear.
2. Tap Yes to cancel the backup operation or No to resume it.
Quitting Card Backup Tool
• Tapping the OK button on the dialog box that appears at the end of a backup operation
automatically quits Card Backup Tool.
• To quit Card Backup Tool without performing a backup operation, tap the Cancel button.
Restoring Data
The following applies whenever you perform a restore operation.
• If the same file or registry data exists in both CASSIOPEIA memory and on the memory card, the
data in CASSIOPEIA memory is overwritten with the data on the memory card.
• Any files or registry data in CASSIOPEIA memory that is not on the memory card is left as-is.
• Calendar, Contacts, Tasks, and Inbox data in CASSIOPEIA memory is all overwritten with the
corresponding data from the memory card.
To Next Page
Loading...
Need help?
General