EN-7
1.
Press 3 FUNCTION and 4 GRAND PIANO
at the same time.
This starts playback of the two demo songs.
• For demo song play, the Digital Piano setup is
changed automatically to optimize it for the demo song
being played.
• To toggle between demo songs during playback, hold
down 3 FUNCTION and press the [–] (D4) or [+]
(E}4) keyboard key.
• Demo song play will repeat until you perform the
operation in step 2 below.
2.
To stop demo song play, press 3 FUNCTION
or 4 GRAND PIANO.
• If Auto Power Off is enabled, power will turn off
automatically at the applicable trigger time after a period of
non-use, even if demo play is being performed. You can
disable Auto Power Off, if you want, by performing the
operation under “To enable or disable Auto Power Off”
(page EN-5).
The Digital Piano has 10 built-in tones. In addition to using a
single tone, you can also select two different tones and sound
them together.
Use the Tone keyboard keys (C3 through A3) to select a tone.
• For information about tone names, refer to the “Tone List”
(page EN-21) and “Keyboard Function List” (page EN-22).
Press 4 GRAND PIANO. You can also select the GRAND
PIANO STANDARD tone using the operation under “To select
a single tone” (page EN-8).
Selecting this tone causes the 4 GRAND PIANO button
lamp to light.
• The GRAND PIANO STANDARD tone is the default tone
when the Digital Piano is turned on.
• The 4 GRAND PIANO button lamp is unlit during demo
song play.
Digital Piano Operation
Listening to Demo Play
Demo Song List
Song No. Song Name Tone Name
1 Prélude
[Suite bergamasque]
GRAND PIANO
STANDARD
2 Original ELEC.PIANO 1
[–] key (D4)
[+] key (E}4)
Selecting a Tone
Selecting the GRAND PIANO STANDARD
Tone
C8
Tone keys (C3 through A3)
Tone names
To Next Page
Loading...
Need help?
General
Weight and Dimensions
