Digital Piano Operation
EN-12
■ To adjust the metronome volume
• You can adjust the metronome value within the range of 0
(muted) and 42 (maximum). Always input two digits. To
specify a one-digit value, input zero (0) for the unused
leading digit.
1.
While holding down 3 FUNCTION, perform
steps (1) and (2) below.
(1) Press the METRONOME VOLUME keyboard key
(C{4).
(2) Use the [0] (E4) through [9] (C{5) keyboard keys to
input a two-digit volume value.
For example, to specify a volume value of 8, press
keyboard keys in the following sequence: [0] (E4) 3
[8] (C5). Inputting the second and final digit will
cause a short and then long beep to sound,
indicating that the value you input was applied.
• You can also raise or lower the volume by
pressing the keyboard [+] key (E}4) or [–] key
(D4).
• To return to the initial default setting (36), hold
down the keyboard [+] (E}4) and [–] (D4) keys at
the same time until a long beep sounds.
2.
Release 3 FUNCTION.
You can split the keyboard in the center for duet play so the
left and right sides have the same ranges.
The Duet Mode is the perfect way to conduct lessons, with the
teacher playing on the left side as the student playing the
same song on the right side.
Keyboard
Pedal Operation when Playing a Duet
● Optional SP-34 Pedal Unit
The left pedal operates as the left side damper pedal, while
the right pedal is the right side damper pedal.
• Only the damper pedal for the right side keyboard supports
half-pedal operations.
● Supplied SP-3 Pedal
To use the SP-3 Pedal as the right keyboard damper pedal,
connect it to the 6 DAMPER PEDAL jack.
• Half-pedal operation is not supported in this case.
Splitting the Keyboard for Duet
Play
Split point
Left keyboard Right keyboard
(middle C) (middle C)
Left side damper pedal
Left and right side
damper pedal
Right side damper pedal
(Half-pedal operation
supported)
To Next Page
Loading...
Need help?
General
