EN-8
1.
While holding down 3 FUNCTION, press the
DEMO (B2) keyboard key.
This starts playback of the two demo songs.
• For demo song play, the Digital Piano setup is
changed automatically to optimize it for the demo song
being played.
• To toggle between demo songs during playback, hold
down 3 FUNCTION and press the [–] (D4) or [+]
(E}4) keyboard key.
• Demo song play will repeat until you perform the
operation in step 2 below.
2.
To stop demo song play, press 3 FUNCTION
or 4 a.
• If Auto Power Off is enabled, power will turn off
automatically at the applicable trigger time after a period of
non-use, even if demo play is being performed. You can
disable Auto Power Off, if you want, by performing the
operation under “To enable or disable Auto Power Off”
(page EN-5).
The Digital Piano has 10 built-in tones. In addition to using a
single tone, you can also select two different tones and sound
them together.
Use the Tone keyboard keys (C3 through A3) to select a tone.
• For information about tone names, refer to the “Tone List”
(page EN-27) and “Keyboard Function List” (page EN-28).
Press 3 GRAND PIANO. You can also select the GRAND
PIANO STANDARD tone using the operation under “To select
a single tone” (page EN-9).
• The GRAND PIANO STANDARD tone is the default tone
when the Digital Piano is turned on.
Digital Piano Operation
Listening to Demo Play
Demo Song List
Song No. Song Name Tone Name
1 Prélude
[Suite bergamasque]
GRAND PIANO
STANDARD
2 Original ELEC.PIANO 1
DEMO key (B2)
[+] key (E}4)
[–] key (D4)
Selecting a Tone
Selecting the GRAND PIANO STANDARD
Tone
C8
Tone keys (C3 through A3)
Tone names
To Next Page
Loading...
Need help?
General
