— 3 —
Notes:
1. After initialize operation, the clock counts from 00 : 00 A.M. and also the calendar is started from
00 - 00 - 00.
2. If the memory of RAM is broken, the machine will be initialized after power on.
4. DIAGNOSTIC OPERATION
4-1. How To Start
(1) Plug the power cord into an outlet.
(2) Execute the MAC operation.
(3) Turn the mode switch to "Z" position.
(4) Input 99999999 and press the sub total button.
(5) Start the diagnostic program and issued following receipt.
Note: If you have done the registration after MAC operation, the Diagnostic program can not start.
00•00•00
00:00
No
0002
••••••••–
• •2749• •
Date
Time
Consecutive No.
Start printing for diagnostic program
To Next Page
Loading...
