Getting Ready
EN-33
5.
Place the piano onto the stand.
• Slide the piano onto the stand from behind so the
bolts on the bottom of the piano engage with the slots
of stand brackets.
• The sides of the piano will overhang the left and right
side panels slightly. Adjust the piano position so the
left and right overhang is the same.
6.
Use the two screws to secure the piano to
the stand.
• The screws keep the piano from slipping off the
stand. Never use the piano without the screws
installed.
Bracket slot
Back of piano
Stand side panel
H
To Next Page
Loading...
