Getting Ready
EN-59
2.
Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
• Secure the pedal cord with the clip
.
3.
Plug the power cord of the AC adaptor that
comes with the Digital Piano into a household
power outlet as shown in the illustration
below.
Make sure that the cover is full open whenever you are
playing on the keyboard. A partially open cover can
suddenly close unexpectedly and pinch your fingers.
Also take care to avoid pinching your fingers whenever
opening or closing the keyboard cover.
1.
Insert music stand into the groove on the
Digital Piano console as shown in the figure
below.
2.
Install the headphones hook.
Keyboard Cover
Household power outlet
AC adaptor
Power cord
To install the music stand and
headphones hook
2-1. Insert the headphones hook
into the two
holes on the bottom of the piano.
2-2. Use screw
to secure the headphones hook
in place.
To Next Page
Loading...
