364
20-7 Searching for Data Inside a Program
Example To search for the letter “A” inside the program named OCTA
1. Recall the program.
2. Press 3 (SRC) and input the data you want to search for.
3(SRC)
aA
•You cannot specify the newline symbol (_) or display command (^) for the
search data.
3. Press w to begin the search. The contents of the program appear on the
screen with the cursor located at the first instance of the data you specified.
Indicates search operation is in progress
4. Press w to find the next instance of the data.
• If there is no match inside the program for the data you specified, the contents
of the program appear with the cursor located at the point from which you
started your search.
•Once the contents of the program are on the screen, you can use the cursor
keys to move the cursor to another location before searching for the next
instance of the data. Only the part of the program starting from the current
cursor location is searched when you press w.
•Once the search finds an instance of your data, inputting characters or moving
the cursor causes the search operation to be cancelled (clearing the Search
indicator from the display).
• If you make a mistake while inputting characters to search for, press A to
clear your input and re-input from the beginning.
To Next Page
Loading...
Need help?
General
