352
20-1 Before Programming
The programming function helps to make complex, often-repeated calculations
quick and easy. Commands and calculations are executed sequentially, just like
the manual calculation multistatements. Multiple programs can be stored under file
names for easy recall and editing.
Select the PRGM icon in the Main Menu and enter the PRGM Mode. When you
do, a program list appears on the display.
•{EXE}/{EDIT} ... program {execute}/{edit}
•{NEW} ... {new program}
P. 368 •{DEL}/{DEL·A} ... {specific program}/{all program} delete
P. 362 •{SRC}/{REN} ... file name {search}/{change}
•{LOAD}* ... {loads a built-in Program Library program}
*See the separate Software Library Manual for details (except fx-
9750G PLUS, CFX-9850G PLUS).
* The following models do not support the LOAD command: fx-9750G
PLUS, CFX-9850G PLUS.
• If there are not programs stored in memory when you enter the PRGM Mode,
the message “No Programs” appears on the display and only the NEW item
(3) is shown in the function menu.
The values to the right of the program list indicate the number of bytes used up
by each program.
File Name
Program
File Name
Program
File Name
Program
CFX
Selected memory area
(use
f
and
c
to move)
To Next Page
Loading...
Need help?
General
