20050501
u To generate a number table by assigning list values to x
(1) Create and save the list of values to be assigned.
list1 = 1, 2, 3, 4, 5
(2) In line y1 of the Graph & Table application Graph Editor window, input and save
y = 3x
2
– 2.
(3) Specify the list that contains the values you want to assign to x (list1 in this example).
•You can configure list data settings using the Basic Format dialog box.
For details about Basic Format settings, see “14-3 Setup Menu Settings”.
(4) On the Graph Editor window, tap the function you want to use for number table
generation (y1 in this example).
(5) Tap #.
• This generates the number table and displays the result on the Table window.
3-4-3
Using Table & Graph
Tip
• The above operation is possible only when “List” (list1 through list6 or a list variable created by
you) is selected for the Basic Format dialog box [Table Variable] item. Note that “Table Input” is
the default, so you need to change the [Table Variable] setting in order to generate a table using
list values.
To Next Page
Loading...
