20050501
u To add a labeled point to an existing line
You can use the following procedure to add a labeled point to an existing line, to a side of an
n-gon, to the periphery of a circle or ellipse, etc.
(1) Tap [Draw] and then [Point].
• This highlights the point button on the toolbar.
(2) Drag the stylus on the screen towards the line where you want to add the labeled point.
• This selects the line, which is indicated by “k”.
8-2-4
Drawing Figures
(3) Drag the stylus to the location on the line where you want to add a labeled point, and
then lift the stylus from the screen.
To Next Page
Loading...
